Lexmark z2420 ユーザーガイド
If you want to set the printer as the default printer:
a
Go back to the Printer List dialog, and then select the printer.
b
Click Make Default.
D
ISCONNECT
AND
RECONNECT
POWER
SUPPLY
1
Press
to turn off the printer.
2
Disconnect the power cord from the wall outlet.
3
Remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press
to turn on the printer.
R
EMOVE
AND
REINSTALL
THE
SOFTWARE
If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer
option when sending a print job, then try uninstalling and reinstalling the software.
option when sending a print job, then try uninstalling and reinstalling the software.
Solving printer power problems
The printer and the computer cannot exchange data.
These are possible solutions. Try one or more of the following:
M
AKE
SURE
THE
PRINTER
POWER
SUPPLY
IS
ATTACHED
CORRECTLY
1
Press
to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press
to turn the printer on.
M
AKE
SURE
THE
PRINTER
IS
NOT
IN
SLEEP
MODE
If the power light is blinking on and off slowly, then the printer is in sleep mode.
1
Unplug the power cord from the wall outlet.
2
Wait ten seconds, and then insert the power cord into the wall outlet.
3
Press
to turn the printer on.
56