Lexmark z2420 ユーザーガイド
5
Select your operating system.
6
Select the file that you want to download, and then follow the directions on the computer screen.
Enabling the USB port in Windows
To confirm that the USB port is enabled on the computer:
1
Do one of the following:
In Windows Vista
a
Click
Control Panel.
b
Click System and Maintenance System.
c
Click Device Manager.
In Windows XP
a
Click Start.
b
Click Control Panel Performance and Maintenance System.
c
From the Hardware tab, click Device Manager.
In Windows 2000
a
Click Start.
b
Click Settings Control Panel System.
c
From the Hardware tab, click Device Manager.
2
Click the plus sign (+) beside Universal Serial Bus Controller.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
Wireless troubleshooting
Printing a network setup page
A network setup page lists the configuration settings of your printer, including the IP address and MAC address of the
printer.
printer.
1
Make sure the printer is turned on.
2
Press
.
The
light pulses.
3
Open the access cover.
4
Press and hold
.
5
While holding
, press
.
6
When the
light becomes steady, release
.
The network setup page prints.
58