Microtek 1000xl ユーザーガイド

14     ScanMaker 1000XL Supplement

To scan non-standard-size film such as 8" x 10" film, medical and dental X-rays, use
the Film Alignment Ruler, which allows you to scan film up to 14" x 17" in size.

2

1

0

3

4

5

6

5

4

3

2

1

1. Place the Film Alignment Ruler* on the scanner glass surface.

2

1

0

3

4

5

6

5

4

3

2

1

2. Place the film (X-ray or other non-

standard size) to be scanned on the
scanner glass surface, and center the
film along the Film Alignment Ruler on
the scanner.

Important: Align the Film Alignment
Ruler firmly against the corners (left
and right) of the U-shaped ruler
located at the front of the scanner,
with the ruler oriented correctly and
with the correct side up. During
placement of the Ruler, make sure that
the calibration strip on the scanner
glass surface is kept clear and free of
obstruction at all times.

Film Alignment Ruler

Calibration strip

* Please note that the Film Alignment
Ruler should be removed from the
glass surface of the scanner if the
width of the film is larger than the
width of the scanner glass surface.

If the Film Alignment Ruler is not going
to be used, align the film to be
scanned against the top corners (left
and right) of the U-shaped ruler
located at the front of the scanner.
During placement of the film, make
sure that the calibration strip on the
scanner glass surface is kept clear and
free of obstruction at all times.

Calibration strip

2

1

0

3

4

5

6

5

4

3

2

1