KitchenAid 20.8 Cu. Ft. 36" Width Built In Panel Ready French Door Refrigerator インストールガイド

4. Tape the 7 ft (2.13 m) flexible codes-approved water supply 

line to the floor, 7" (17.78 cm) from the left side of the 
refrigerator. Tape along the length of the tubing, which will 
allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes -
approved water supply line to be loose at the front of the 
refrigerator for connecting to the refrigerator. 

5. Connect the 7 ft (2.13 m) flexible codes-approved water 

supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the 
refrigerator, a secondary water shutoff valve may be installed 
in line with the water supply line at the front of the product. 

6. Turn on the water supply valve and check all connections 

for leaks.

Plug in Refrigerator

1. Set control switch at top of cabinet to the OFF position. 

2. Plug into a grounded 3 prong outlet.

Move Refrigerator to Final Location

IMPORTANT: To avoid floor damage, make sure levelers are 
raised (not touching floor) and refrigerator is on rollers before 
moving. 

1. Place top of cardboard carton or plywood under refrigerator. 

Remove dolly.

2. Do not remove film or cover.

3. Move the refrigerator straight back and evenly into the 

opening. Be sure that the refrigerator side trims are not 
interfering with the door opening. Also, be sure that the 
water tubing is not kinked and the power supply cord is 
on top of the refrigerator.

A

B

C

D

E

F

G