Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Configuring QoS
5-5
v1.0, September 2007
2. Select either Strict Priority or WRR to specify the traffic scheduling method.
3. Click APPLY to update the device.
Bandwidth
After packets are assigned to a queue, a scheduling scheme can be assigned to an interface, using
either:
either:
•
Committed Burst Size – Indicates the maximum number of data bits transmitted within a
specific time interval.
specific time interval.
•
Committed Information Rate – Indicates the rate that data is transmitted. The rate is
averaged over a minimum time increment.
averaged over a minimum time increment.
The Bandwidth screen allows the user to define Ingress Rate Limit and Egress Shaping Rates.
To define bandwidth settings:
1. Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays:
The Bandwidth screen contains the following fields:
•
Interface – Displays the ports for which the bandwidth settings are displayed.
•
Ingress Rate Limit Status – Select whether rate limiting is defined on the interface. The
possible field values are:
possible field values are:
–
Enable – Enable ingress rate limiting on the interface.
–
Disable – Disable ingress rate limiting on the interface.
Figure 5-4