Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド

5-6

Configuring QoS

•

Ingress Rate Limit – Enter the rate limit in kilobits per seconds. The possible field range 
is 70k up to the maximum port speed. 

•

Egress Shaping Rate Status – Select whether egress shaping is defined on the interface. 
The possible field values are:

–

Enable – Enable egress shaping rate on the interface.

–

Disable – Disable egress shaping rate on the interface.

•

Egress Shaping Rate (CIR) – Enter the Egress Shaping Committed Information Rate 
(CIR) in kilobits per seconds. The possible field range is 0 to 62.5Mb.

2. Select the interface.

3. Choose either Enable or Disable in the Ingress Rate Limit Status provided field in the first 

row.

4. If you selected Enable in the Ingress Rate Limit Status field, enter the Ingress Rate Limit in 

the provided field in the first row.

5. Choose either Enable or Disable in the Egress Shaping Rate Status provided field in the first 

row.

6. If you selected Enable in the Egress Shaping Rate Status field, enter the Egress Shaping 

Rate (CIR) in the provided field in the first row.

7. Click APPLY to update the device.

The CoS Advanced menu contains the following options:

•

•

The CoS to Queue Mapping screen contains fields for mapping CoS values to traffic queues.