Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド
FS700TS Smart Switch Software Administration Manual
Managing Security
6-11
v1.0, September 2007
2. Select Disable or Enable for the Port Based Authentication State in the provided field.
3. If you selected Enable for the Port Based Authentication State, then select the
Authentication Method from the list in the provided field.
4. Select Disable or Enable for the Guest VLAN status in the provided field.
5. If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the
provided field.
6. Click APPLY to update the device.
Port Authentication
The Port Authentication screen allows to configure port authentication interface parameters.
To configure port-based authentication global properties:
1. Click Security > Port Authentication > Advanced > Port Authentication. The Port
Authentication screen displays:
The Port Authentication screen contains the following fields:
•
Interface – Displays the interfaces.
•
User Name – Displays the supplicant (client) user name, once the user is authenticated.
•
Port Control – Select the port authorization state.
–
Auto – The port control is Auto and a single client has been authenticated via the port.
Figure 6-7