Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド

Managing Security

6-13

2. Select the interface.

3. Select the Port Control state, Guest VLAN mode, Periodic Reauthentication status and 

Authenticator State in the provided fields in the first row.

4. If you selected Enable as the Periodic Reauthentication status, enter the Reauthentication 

Period in the provided field in the first row.

5. Enter the Quiet Period, Resending EAP time, Max EAP Requests, Supplicant Timeout 

and Server Timeout in the provided field in the first row.

6. Click APPLY to update the device.

The Traffic Control menu contains the following options:

•

•

Storm Control limits the amount of Multicast and Broadcast frames accepted and forwarded by the 
device. When Layer 2 frames are forwarded, Broadcast, and Multicast frames are flooded to all 
ports on the relevant VLAN. This occupies bandwidth and loads all nodes on all ports.

A Broadcast Storm is a result of an excessive amount of broadcast messages simultaneously 
transmitted across a network by a single port. Forwarded message responses are heaped onto the 
network, straining network resources or causing the network to time out.

Storm control can be enabled per port by defining the packet type and the rate the packets are 
transmitted. The system measures the incoming Broadcast and Multicast frame rates separately on 
each port, and discards the frames when the rate exceeds a user-defined rate. By default, Storm 
Control is enabled on all ports for Broadcast packets with a threshold of 200 kbps. Storm Control 
is enabled by default.

The Storm Control screen provides fields for configuring broadcast storm control.