Netgear FS728TS - ProSAFE 24 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports インストールガイド

Getting Started with Switch Management

1-9

You can set a new password of up to 20 ASCII characters. 

1. Click Password Change from the Switch Setting section. The Password Change screen 

appears. You can set a new password. You must enter the old and new passwords and confirm 
the new one.

2. Click Set to enable the new password. 

The FS700TS Smart Switch software is upgradeable, and enables your switch to take advantage of 
improvements and additional features as they become available. The upgrade procedure assumes 
that you have downloaded or otherwise obtained the firmware upgrade and that you have it 
available as a binary file on your computer. This procedure uses the TFTP protocol to implement 
the transfer from computer to switch.

.

If you click Firmware Upgrade from the main screen (see Figure 1-1), after you have selected the 
switch to upgrade, the following screen appears:

Note: You can also upgrade the firmware using the Download menu of the switch (see 

).