Honeywell Wi-Fi 7-Day Programmable Thermostat (RTH6580WF) ユーザーガイド
17
69-2715EF—07
M33881
Smart Response Technology
This feature allows the thermostat to “learn”
how long the heating/cooling system takes to
reach programmed temperature settings, so
the temperature is reached at the time you set.
For example: Set the Wake time to 6:00 am,
and the temperature to 70°. The heat will come
on before 6:00 am, so the temperature is 70°
by 6:00 am.
how long the heating/cooling system takes to
reach programmed temperature settings, so
the temperature is reached at the time you set.
For example: Set the Wake time to 6:00 am,
and the temperature to 70°. The heat will come
on before 6:00 am, so the temperature is 70°
by 6:00 am.
Note:
System setting function 13 controls
Smart Response Technology. See “Smart
Response Technology” on page 19.
Response Technology” on page 19.
The message
Recovery
is displayed when the
system is activated before
a scheduled time period.
system is activated before
a scheduled time period.
Compressor protection
This feature forces the compressor to wait
a few minutes before restarting, to prevent
equipment damage.
a few minutes before restarting, to prevent
equipment damage.
The message
Cool On (or Heat On for
a heat pump) will flash during the
wait time.
wait time.
M33882
Auto changeover
This feature is used in climates where both air
conditioning and heating are used on the same day.
When the system is set to
conditioning and heating are used on the same day.
When the system is set to
Auto,
the thermostat automatically
selects heating or cooling
depending on the indoor temperature.
Heat and cool settings must be at least 3 degrees
apart. The thermostat will automatically adjust
settings to maintain this 3-degree separation.
selects heating or cooling
depending on the indoor temperature.
Heat and cool settings must be at least 3 degrees
apart. The thermostat will automatically adjust
settings to maintain this 3-degree separation.
Note:
System setting function 12 controls Auto
changeover. See “Manual/Auto Changeover” on
page 19.
page 19.
MCR33893