avolites pearl exper ttitan ユーザーズマニュアル

Page 118 – 11. User Settings and other options

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

Chases: the blue or grey key can be allocated to Disabled, Flash, 

Swop, Latch, Go, Stop, Preload, Connect, Tap Tempo. 
Cue Lists: the blue or grey key can be allocated to Disabled, Flash, 

Swop, Go, Go Back, Stop, Preload, Connect, Next Cue +, Next Cue -, 

Review Live Cue, Cut Next Cue To Live, Snap Back. 
Macros: can be set to Select or Prefer Macro (the Macro function will 

take precedence over other functions stored on the button). 
Quick Record: allows you to disable the quick record function. 
 

A Key profile is selected in Run mode by pressing Softkey B and 

selecting the desired profile from the list. In Program mode, hold the 

Avo Shift button and press [Select Key Profile]. 

Each playback can have an individual Key Profile allocated to it. This 

allows you to customise the panel button functions differently for 

each playback. The Key Profile for the playback is selected using the 

[Key Profile] option on the Playback Options menu (Softkey B on the 

main program menu). If the playback Key Profile is set to “None”, the 

default global profile is used.  
 

The Pearl System menu is accessed by turning the key to System. 

The options in this menu are separated from the other options on the 

console because you would normally only change them occasionally, 

or because they can have serious effects on the way the console 

works and you wouldn’t want to change them accidentally. 

Note:  When the key is turned to System, playback control, preset 

controls and programming buttons are all disabled. 

This option sets how the console communicates with Active Fixtures 

and with Remotes. See section 13.6 for details of Active Fixtures and 

This option sets up networking (Ethernet) parameters for the console. 

The User Settings menu may also be accessed from Program mode: 

hold down the Avo Shift button and press [User Settings]. 
• 

[Prompt for Merge or Replace…] sets the console action when 

you try to save to a handle or playback which is already used. 

The options are [Prompt for Merge or Replace] - the console will 

always prompt, [Always Merge] - the console will never prompt 

or [Palettes Always Merge] - the console will prompt unless you 

are saving a palette.