avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
2. Patching - Page 33
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
can control it all together. This is called a Pending Dimmer.
•
[Preset Palettes] sets whether the console will create default
colour, gobo and position palettes for the new fixture. These are
assigned to palette handles 1-30.
•
Press View then [Fixture Patch] to show the DMX address for
•
If a patch goes over the capacity of a DMX line, the Pearl will
patch at the beginning of the next line. For example if you try
to patch a Mac500 at channel A510, it will actually be patched
at B1.
2.1.4
Visualiser Auto Patch
If you want to use Visualiser on the console, start Visualiser by
pressing View then [Open workspace window] then [Visualiser].
Visualiser will open in a workspace window with an automatic
representation of your patch. You can change the size of the
Visualiser window, and if you have the Touch Wing connected you can
move Visualiser between screens, using [Window Options] on the
View menu.
You will see the fixtures laid out on screen as they are on the console,
You will see the fixtures laid out on screen as they are on the console,
so any spaces between fixtures will be preserved and fixtures patched
to the top row of presets will be shown above fixtures patched to the
bottom row of presets.
2.2
Edit
2.2.1
Changing the DMX address of a fixture
You can re-patch a fixture to a different DMX address or a different
DMX output line. All programming is kept.
1> Press Patch (if you’re not already in Patch mode).
2> Press [Repatch Fixtures].
3> Press the blue Select button of the fixture you want to change.
4> To change DMX press [Address], type the new address and
2> Press [Repatch Fixtures].
3> Press the blue Select button of the fixture you want to change.
4> To change DMX press [Address], type the new address and
press enter
5> To change the DMX output line, press [DMX Line=x] and enter
a new output line number 1-12.
6> Press Enter or [Repatch] to confirm the change.
7> Repeat from step 3 if you want to change other fixtures.
7> Repeat from step 3 if you want to change other fixtures.
•
You can “Park” the fixture using [Park]. This removes the
fixture from the DMX output map, but all programming is
retained.
•
If the new DMX address already has another
fixture or dimmer patched on it, the console will
display a warning sign next to the address. If
you proceed with the change, the console will offer you two
options to fix the problem (unless this is disabled in User
another address] to abort the change or [Park] to “park” the
conflicting fixture. All programming for the parked fixture is
preserved, but you need to repatch it to a free DMX address
using the above procedure before you can use it again. If you