avolites pearl exper ttitan ユーザーズマニュアル
Copyright Avolites Limited 2010
Page 36 – 2. Patching
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
1> Enter patch mode by pressing Patch.
2> Press [Update Personality].
3> The console shows you a list of personalities used in the show
2> Press [Update Personality].
3> The console shows you a list of personalities used in the show
which can be updated.
4> Press the personality you want to update.
•
The new personality is loaded from the Titan/Personalities
folder.
2.3
Copy and Move
2.3.1
Copying or moving a patched fixture
Using the Copy button you can make a copy of an existing fixture or
move it to a new button. You can copy or move multiple fixtures in
one operation. You cannot link fixtures.
Move is useful for tidying up the console.
Move is useful for tidying up the console.
1> Press the blue Copy button.
2> Select [Copy] or [Move]. Pressing the Copy button again will
2> Select [Copy] or [Move]. Pressing the Copy button again will
also toggle through these options.
3> Press or touch the select button of the fixture you want to
copy/move. You can select multiple fixtures by holding the first
and pressing the last of the range, or for touch buttons by
sliding your finger across the buttons.
4> Press or touch the empty select button where you want it to go.
•
The ML Menu button latches the Copy/Move/Link menu, so you
can keep copying or moving things without having to keep
pressing the Copy button. Press again to unlatch.
•
The [Retain Layout] or [Bunch Up] options are used when
copying a group of fixtures with empty handles in the group –
you can either keep the empty handles, or bunch up the used
handles together.
•
When in Copy mode, option [Copy Legends] can be changed to
[Don’t copy legends] so that the copied fixtures are given
default legends.
•
When in Move mode, [Swap Items if Required] will attempt to
reposition any existing handles which are in the way of the
move. This is useful when rearranging buttons on a page which
is nearly full.
2.3.2
Using copied fixtures
Fixture copying is very useful if you need an additional fixture of a
type you’ve already patched and programmed. The new copy will
come complete with all the cues and palettes of the original fixture
you’ve copied.
The copied fixture will be “Parked” (have no DMX channel allocated)
The copied fixture will be “Parked” (have no DMX channel allocated)
and you will need to repatch it before you can use it (see section