avolites pearl exper ttitan ユーザーズマニュアル

Page 80 – 7. Chases

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

and didn’t change the speed, size or phase of the shape from 

the previous step; or if you Included the shape from the 

previous step and have not modified it) 

• 

You can set a legend for the chase by pressing Set Legend, 

then pressing the Swop button for the chase and entering the 

legend, as with cues. 

• 

There is no limit to the number of steps in a chase. 

To fire a chase, raise the fader of the playback. (You can also use the 

Flash/Swop buttons). The chase 

will start to run. 

• 

The HTP (intensity) 

channels in the chase will 

be controlled by the fader; 

if fade times are 

programmed, the fade will 

stop at the fader level. 

The other channels (LTP) 

will be set as soon as the 

fader moves above zero 

according to the fade 

times programmed in the 

chase. You can set the 

point at which the LTP 

channels activate from the 

User settings menu. 

• 

While the chase is 

running, the lower left 

area of the LCD screen 

shows details of the chase steps. 

• 

You can temporarily pause the chase by pressing the Stop 

button to the right of the wheels. Press Go to resume playback. 

There are many options you can set to determine the way the chase 

runs and these are described in the rest of this chapter. 

When you fire a chase, the wheels and Stop/Go buttons are 

automatically allocated to control the Speed and Crossfade of the 

chase – this is called Connecting the chase. If you have more than 

one chase running, you can choose which chase is connected to the 

controls using the Connect button.   

• 

Connect a different chase to the controls by pressing the 

Connect button (right of the wheels) then the Swop button of 

the chase you want to control. 

• 

Disconnect a chase from the controls by double pressing the 

Connect button. 

• 

You can turn off the “chase autoconnect” option in the User 

Settings menu if you don’t want to connect to a chase when 

you fire it. You will have to use the Connect button to control