buell s1 lightning '97 マニュアル

1.

 Remove nut (1) and washer (2).

2.

Remove two screws (3).

3.

Remove sprocket cover screw (5), washer (6) and
spacer (8).

4.

Remove swingarm drive/support (4) and sprocket cover
(7) as an assembly.

5.

Remove two screws (9) to separate sprocket cover from
swingarm/drive support.

1.

See 

 If removed, attach sprocket cover to

swingarm/drive support with two screws (9). Tighten
screws to 12-17 in-lbs (1.4-1.9 Nm).

2.

Install sprocket cover assembly with screw (5), washer (6)
and spacer (8). Tighten screw to 4-6 ft-lbs (5.4-8.6 Nm).

3.

Install screws (3). Tighten to 20-25 ft-lbs (27.1-33.9 Nm).

4.

Install nut (1) and washer (2). Tighten nut to 30-35 ft-lbs
(40.7-47.4 Nm).

b0204x2x