Microtek gnc m vx2 0506 ユーザーズマニュアル

1.

Connect either end of the Computer Cable to the Computer In port of the

projector, then connect the other end of the Computer Cable to the Monitor

Out port of the notebook.

If the functions of the wireless mouse on the Remote Control need to be

operated, please make the connections to each signal cable according to steps 2

and 3 below:

2.

Connect the Control Cable to the Control port of the projector.

3.

Connect the PS/2 Mouse connector of the Control Cable to the PS/2 mouse

port of the notebook.

You may connect your computer to the USB interface of the projector to enable the

function of the wireless mouse on the remote control. Please follow step 4 below for

connection.

4.

Connect one end of the USB Cable to the USB port of the projector, and

connect the other end of the USB Cable to the USB port of your computer.

5.

Tighten all connector screws to ensure secure connections.

Before connecting the projector to a Macintosh desktop computer, make sure that

both machines have their power shut off.

1.

Remove the Mac monitor cable from the Mac.

2.

Set the DIP switches of the Mac Adapter in accordance with the desired

resolution (i.e. 19” mode).

3.

Connect the Computer Cable to one end of the Mac Adapter.

4.

Tighten all connector screws to ensure secure connections.

5.

Connect the other end of the Mac Adapter to the Mac.

ＶＸ２．ｐ６５

02-10-18, 11:03

14