Microtek gnc m vx2 0506 ユーザーズマニュアル

6.

Connect the other end of the Computer Cable to the Computer In port of the

projector.

7.

If necessary, connect the Mac monitor to the Computer Out port of the

projector.

If the functions of the wireless mouse on the Remote Control need to be

operated, please make the connections to each signal cable according to steps 8

to 10 below:

8.

Connect the Control Cable to the Control port of the projector.

9.

Remove the mouse cable from the Mac Mouse port, and connect the Mac

Mouse Cable to the Mac Mouse port.

10.

Connect the other end of the Mac Mouse Cable to the PS/2 mouse connector

of the Control Cable.

You may connect your computer to the USB interface of the projector to enable the

function of the wireless mouse on the remote control. Please follow step 11 below

for connection.

11.

Connect one end of the USB Cable to the USB port of the projector, and

connect the other end of the USB Cable to the USB port of your computer.

12.

Tighten all connector screws to ensure secure connections.

Before connecting the projector to a Macintosh PowerBook, make sure that both

machines have their power shut off.

ＶＸ２．ｐ６５

02-10-18, 11:04

15