Elitegroup 945GCT-M3 ユーザーズマニュアル
43
Using BIOS
Suspend Type (Stop Grant)
If this item is set to the default Stop Grant, the CPU will go into Idle Mode during
power saving mode.
power saving mode.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically resume the system from
a power-saving mode, use this item to specify the interrupt request line (IRQ) that is
used by the modem. You might have to connect the fax/modem to the motherboard
Wake On Modem connector for this feature to work.
a power-saving mode, use this item to specify the interrupt request line (IRQ) that is
used by the modem. You might have to connect the fax/modem to the motherboard
Wake On Modem connector for this feature to work.
Video Off In Suspend (Yes)
This option defines if the video is powered down when the system is put into suspend
mode.
mode.
Video Off Method (DPMS)
This item defines how the video is powered down to save power. This item is set to
DPMS (Display Power Management Software) by default.
DPMS (Display Power Management Software) by default.
PCI Express PM Function (Press Enter)
This item allows you to enable or disable the PCI Express PM Function.
Wake Up On LAN (Enabled)
The system can be waked up with a software command. If you enable this item, the
system can automatically wake up on LAN.
Energy Lake Function (Disabled)
This item allows you to enable or disable the Energy Lake Function.
Soft-Off by PWR-BTTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you can
create a software power down. In a software power down, the system can be resumed
by Wake Up Alarms. This item lets you install a software power down that is con-
trolled by the power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay 4 Sec. Then
you have to hold the power button down for four seconds to cause a software power
down.
create a software power down. In a software power down, the system can be resumed
by Wake Up Alarms. This item lets you install a software power down that is con-
trolled by the power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay 4 Sec. Then
you have to hold the power button down for four seconds to cause a software power
down.
Resume by Ring (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
on the modem) awakens the system from a soft off state.
Resume by PCI PME (Enabled)
This item specifies whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
when activity or input signal of the specified hardware peripheral or component is
detected.
Resume by USB(S3) (Disabled)
This item allows you to enable or disable the USB device Wakeup function from S3
mode.
This item allows you to enable or disable the USB device Wakeup function from S3
mode.
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception of
a refresh current to the system memory.
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception of
a refresh current to the system memory.
Run VGABIOS if S3 Resume (Auto)
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM)
sleep state.
sleep state.