Sentry Industries PT22 ユーザーズマニュアル

Click on the Input Feed Traps link. 

On the subsequent Input Feed Traps page, select or deselect the desired traps and press Apply. 

For Load traps, enter a maximum load value for the infeed in the High Load Threshold field and press Apply. 
The High Load Threshold value may be 0 to 255 (in amperes). 

Click on the Outlet Traps link. 

On the subsequent Outlet Traps page, select or deselect the desired traps and press Apply. 

The LDAP configuration page is used for setup and maintenance of all settings required to enable 
LDAP support.  For additional information and configuration requirements, see LDAP on page54. 

Select Enabled or Disabled from the LDAP drop-down menu and press Apply.   

Enter the IP address in the Host IP1 and/or Host IP2 address field and press Apply. 

Enter the port number in the LDAP Port field and press Apply. 

Select Simple or MD5 from the drop-down menu and press Apply. 

For more information on LDAP bind password types, see Setting the LDAP bind password type 
on page 55. 

Enter the fully-qualified distinguished name (FQDN) in the Search Bind field and press Apply. 

Enter the Search Bind Password in the Search Bind Password field and press Apply. 

Enter the group membership attribute in the Group Membership Attribute Field and press Apply. 

Select the appropriate value from the drop-down menu and press Apply. 

Enter the User Search Base DN in the User Search Base DN field and press Apply. 

Enter the User Search Filter in the User Search Filter field and press Apply. 

See Creating a descriptive Environmental Monitor name: 

Network on page 13 for information on how to set the DNS IP address. 

Sentry PT22 

Operations 

• 19 

Installation and Operations Manual