Sentry Industries PT22 ユーザーズマニュアル

Setting the filename to be uploaded

The FTP Filename command sets the filename of the firmware file to be uploaded.

To set the FTP filename:

At the Sentry: prompt, type set ftp filename, followed by the firmware filename and press Enter.

Example

The following command sets the FTP filename to snb_s50a.bin:

Sentry: set ftp filename snb_s50a.bin<Enter>

Setting the filepath for the file to be uploaded

The FTP Filepath command sets the filepath for the firmware file to be uploaded.

To set the FTP filepath:

At the Sentry: prompt, type set ftp filepath, followed by the filepath and press Enter.

Example

The following command sets the FTP filepath to ftp://Sentry:

Sentry: set ftp filepath ftp://sentry<Enter>

Displaying FTP configuration information

The Show FTP command displays all FTP configuration information.

• FTP Host IP address
• FTP Host username and password

• Firmware filepath and filename

To display FTP configuration information:

At the Sentry: prompt, type show ftp and press Enter.

Example

The following command displays the FTP configuration information:

Sentry: show ftp<Enter>
FTP Configuration
Host IP Address: 12.34.56.99
Username: guest
Password: OpenSesame
Directory: ftp://sentry
Filename: snb_s52a.bin

SNTP Administration

Sentry supports the use of a network time service to provide a synchronized time reference.

Setting the SNTP server address

The Set SNTP command is used to set the primary and secondary SNTP server addresses.

To set the SNTP server address:

At the Sentry: prompt, type set sntp, followed by primary or secondary, and the SNTP server IP
address. Press Enter.

Example

The following command set the primary SNTP server address to 204.152.184.72:

Sentry: set sntp primary 204.152.184.72<Enter>

• Operations

Sentry PT22

Installation and Operations Manual