Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Sentry Industries
  4. PT22
  5. ユーザーズマニュアル

Sentry Industries PT22 ユーザーズマニュアル

ダウンロード
ページ / 74
Displaying LDAP configuration information 
The Show LDAP command displays LDAP configuration information. 
•  Enabled-disabled status of LDAP support 
•  Directory Services server IP address and port 
•  Bind request password type and remote authentication order 
•  Search bind distinguished name and password 
•  User search base distinguished name and filter 
•  Group membership attribute and type 
To display the LDAP configuration information: 
At the Sentry: prompt, type show ldap and press Enter. 
Example 
The following command displays the LDAP configuration information: 
Sentry: show ldap 
   LDAP Configuration 
      LDAP:        Enabled 
      Host IP1:    98.76.54.32 
      Host IP2:    0.0.0.0 
      Port:        8888 
      Bind Type:   MD5 
      Auth Order:  Remote->Local 
      Search Bind 
         DN: cd=guest,cn=Users,dc=servertech,dc=com 
         Password: OpenSesame 
      User Search 
         Base DN: cn=Users,dc=servertech,dc=com 
         Filter: (samaccountname=%s) 
      Group Membership 
         Attribute: memberof 
         Value Type: DN  
Setting the DNS IP address 
The Set DNS command sets the TCP/IP address of the Domain Name server (DNS). 
NOTE:  LDAP requires the definition of at least one Domain Name server. 
 
To display the DNS configuration information, use the Show Network command as described on page 39. 
To set the DNS IP address: 
At the Sentry: prompt, type set, followed by dns1 or dns2 and the Domain Name server’s IP address.  
Press Enter. 
Example  
The following command sets the primary Domain Name server IP address to 98.76.54.254: 
Sentry: set dns1 98.76.54.254<Enter> 
Verifying the DNS configuration 
The Ping command may be used to verify the configuration of the DNS IP address. 
To verify the DNS configuration: 
At the Sentry: prompt, type ping, followed by the domain component of the Directory Services server 
previously configured and press Enter. 
Example 
The following command verifies the DNS configuration: 
Sentry:  ping servertech.com 
   Pinging servertech.com [98.76.54.32] with 64 bytes of data: 
   Reply from 98.76.54.32: bytes=64 pseq=0 triptime=0 
   Reply from 98.76.54.32: bytes=64 pseq=1 triptime=0 
   Reply from 98.76.54.32: bytes=64 pseq=2 triptime=0 
   Reply from 98.76.54.32: bytes=64 pseq=3 triptime=0 
   Reply from 98.76.54.32: bytes=64 pseq=4 triptime=0 
58 
•   Advanced Operations 
Sentry PT22 
 
 
 
Installation and Operations Manual