Sentry Industries PT22 ユーザーズマニュアル

The Create LDAPGroup command creates an LDAP group. 

At the Sentry: prompt, type create ldapgroup, optionally followed by a 1-16 character group name 
(Spaces are not allowed, and LDAP group names are not case sensitive). Press Enter. 

The following command creates the LDAP group PowerUser: 

Sentry: create ldapgroup PowerUser<Enter> 

The Remove LDAPGroup command removes an LDAP group. 

At the Sentry: prompt, type remove ldapgroup, optionally followed by a group name. Press Enter. 

The Set LDAPGroup Access command sets the access level privileges for an LDAP group.  The Sentry 
has four defined access privilege levels; Admin, User, On-Only and View-Only.  For more information 
on user access levels, see Changing a user’s access privilege level: on page 17. 

At the Sentry: prompt, type set ldapgroup access, followed by admin, user, ononly or viewonly, 
optionally followed by a LDAP group name and press Enter. 

The following command sets the LDAP group access level for LDAPAdmin to Admin: 

Sentry: set ldapgroup access admin ldapadmin<Enter> 

The following command sets the LDAP group access level for PowerUser to User: 

Sentry: set ldapgroup access user poweruser<Enter> 

The Set LDAPGroup Envmon command grants or removes input status viewing privileges to/from an 
LDAP group. 

At the Sentry: prompt, type set ldapgroup envmon followed by on or off, optionally followed by a 
group name and press Enter. 

The following command grants intput status viewing privileges to the LDAP group PowerUser: 

Sentry: set ldapgroup envmon on poweruser<Enter> 

Sentry PT22 

Advanced Operations 

• 59 

Installation and Operations Manual