SEH Computertechnik TPG60 ユーザーズマニュアル
ThinPrint® Settings
TPG60 User Manual
50
ª
The setting is saved.
Defining the Bandwidth via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – ThinPrint® from the navigation bar.
4. Tick Bandwidth.
5. Enter the desired bandwidth.
6. Click OK to confirm.
4. Tick Bandwidth.
5. Enter the desired bandwidth.
6. Click OK to confirm.
ª
The setting is saved.
6.3
How to Define Printers?
Print jobs are sent from the ThinPrint® server to the TPG60. After
the decompression of the print jobs, the TPG60 forwards the data to
the printers.
the decompression of the print jobs, the TPG60 forwards the data to
the printers.
The print jobs are assigned via a printer ID. Up to six network
printers can be connected to the ThinPrint® port which is defined
via the TPG60.
printers can be connected to the ThinPrint® port which is defined
via the TPG60.
What do you want
to do?
Integrating Printers via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – ThinPrint®.
2. Select Configuration – ThinPrint®.
3. Enter the relevant data; see: table 4
4. Click Save to confirm.
ª
The setting is saved.