Korg D3200 ユーザーズマニュアル

An identically-named file already exists.

→ Change the file name.

The inserted disc is in a format that the D3200 is unable 
to read.

You have inserted a blank disc.

It is currently not possible to perform this operation.

The track editing operation cannot be executed because 
there is a problem with the TO and END locations you 
specified.

→ The TO–END region must not exceed 12 hours.

There is not enough of an editing region for track editing 
to occur.

No more audio data files can be saved on the song drive.

→ Either erase the Undo data, or delete unneeded songs. 

Alternatively, use a different song drive.

The number of tracks selected for recording exceeds the 
allowable number of tracks for punch-recording.

→ Refer to “Recorder” (→p.64).

When using Disc At Once to create an audio CD, the 
data contained a track that is shorter than four seconds.

→ The minimum time for a track (the total of the song to be 

written and the post-gap) is four seconds.

In order to perform Trigger/RecStart recording, the 
MIDI Sync

 setting cannot be set to MTC Master.

In order to perform Trigger/RecStart recording, the 
MIDI Sync

 setting cannot be set to MTC Slave.

You can’t perform trigger recording if the MASTER 
TRACK STATUS

 key is set to REC.

The song cannot be selected or saved because there is an 
error in the Undo data.

→ Delete the song that cannot be selected or saved.
→ Format the affected song drive.

The wrong disc is inserted for the operation you are 
attempting to execute.

This will appear when there is information to be 
conveyed to the user.

→ Click the OK button (or press the panel YES key) and 

continue operation.

This will appear if a problem or malfunction has 
occurred on the D3200.

→ If this type of message appears, write down the contents 

of “****” and contact your Korg distributor.