Matrox Electronic Systems II ユーザーズマニュアル
90 Appendix B: Technical information Matrox Meteor-II /Standard
* N/C = Not connected. This means that the pin might be
defined as part of the VMChannel interface standard but it is
not used on the Matrox Meteor-II /Standard board.
defined as part of the VMChannel interface standard but it is
not used on the Matrox Meteor-II /Standard board.
BNC connector
The BNC connector provides a single composite input to the
Matrox Meteor-II /Standard board. Its pin assignments are as
follows:
Matrox Meteor-II /Standard board. Its pin assignments are as
follows:
■
1: composite 1 or VID_IN1.
■
2 (SHELL): ground.
You can use a standard video cable (available from your local
electronic store) to interface with this connector.
electronic store) to interface with this connector.
Auxiliary power supply input
The auxiliary power supply input connector is a standard 4-pin
male connector that routes power from the computer to a
camera (via the DB-44). Use the 4-pin power cable provided
with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an
auto-resettable fuse. Note that this input is not available on the
CompactPCI and PC/104-Plus form factors.
male connector that routes power from the computer to a
camera (via the DB-44). Use the 4-pin power cable provided
with your board to connect to the power supply of your
computer. The operating current is 1.5 A with an
auto-resettable fuse. Note that this input is not available on the
CompactPCI and PC/104-Plus form factors.
27
DATA[22]
61
DATA[23]
28
DGND
62
DATA[24]
29
DATA[25]
63
DGND
30
DATA[26]
64
DATA[27]
31
DGND
65
DATA[28]
32
DATA[29]
66
DGND
33
DATA[30]
67
DATA[31]
34
DGND
68
SBN
Pin
Signal
Pin
Signal
2
1
1
2
3
4