Arizona MAX-5000XL ユーザーズマニュアル
AZI Customer Service 800-528-7411 or 602-470-1414
Page 23 of 92
5.
MAIN MENU
Press [MENU] to display the MAIN
MENU.
5.1.
Memory Starts Menu
Memory Starts are stored test parameter sets. The MEMORY START MENU allows
access to the stored test parameter sets. This is where the contents of the stored
parameters may be printed out or changed.
The MEMORY STARTS are sequentially
numbered from 1 to the total of Memory
Starts entered into the instrument. The
figure to the right shows memory start 1 of
250 selected (1/250 in the upper right
hand corner). Pressing [INSERT
access to the stored test parameter sets. This is where the contents of the stored
parameters may be printed out or changed.
The MEMORY STARTS are sequentially
numbered from 1 to the total of Memory
Starts entered into the instrument. The
figure to the right shows memory start 1 of
250 selected (1/250 in the upper right
hand corner). Pressing [INSERT
↑] or
[INSERT
↓] will insert a memory start
above or below the highlighted position
respectively. All other memory starts will
be moved down unchanged.
respectively. All other memory starts will
be moved down unchanged.
The “(Factory)” presets are for
standard tests to check the
performance and/or calibrate the
instrument.
standard tests to check the
performance and/or calibrate the
instrument.
The Up and Down Arrow Keys move the highlight one line at a time.
The keys at the bottom of the display allow the memory starts to be cut, copied,