Arizona MAX-5000XL ユーザーズマニュアル

AZI Customer Service 800-528-7411 or 602-470-1414  

Page 49 of 92 

 
This selection is the start of an oven cleaning process that burns off most 
residue build-up in the oven.  Use a fume hood to remove possible toxic 

emissions from the 
work place.  Similar to 
the self-cleaning mode 

in a home oven, the process turns the 
heating elements on to reach an oven 
temperature of 550º

 

C in less than 22 

minutes.  The oven temperature will be 
maintained for a total oven cleaning 
time of 45 minutes from start to finish.  
The heat generated makes the top of 
the instrument hotter than normal.  
Extreme caution should be used to 
prevent injury until the instrument has 
cooled down at the conclusion of the 
cleaning cycle.  During the cleaning cycle, there may be smoke, odor, and possible 
toxic emissions produced by the instrument.  This is normal as the residue is burned 
off the oven lining.  Use a fume hood to remove the fumes and smoke from the work 
place.  Consult the MSDS on your sample materials to determine the content of the 
emissions. 

For a complete description of the oven cleaning procedure, see section beginning on 
page 80. 

 

A CLEANING REMINDER is available 
to remind you to clean the oven 
regularly.  The default factory settings 
are:   

ENABLE - No 

TIME 

– 00:00 

INTERVAL - 0 Weeks 



  To turn the prompt on or off, or 

adjust the interval, go to the Main 
Test Screen and select in order:  MENU, CALIBRATION MENU, OVEN SELF 
CLEANING, and CLEANING REMINDER SETUP. 
  Enable 

– Toggle to YES to enable the prompt or NO to prevent the prompt from 

appearing. 

  Time 

– The time the prompt is to appear, usually the start of the shift (using a 

24 hour format). 

  Interval 

– The interval between calibrations (in weeks).  If the interval is set to 

“00”, the reminder will occur daily.