KitchenAid KRMF706EBS 使用とお手入れ

ページ / 120
19
19
19
19
19
19
Water Filter: 
In U.S.A., order Part #
EDR2RXD1
In Canada, order Part #
EDR2RXD1B
Air Filter: 
Order Part #W10311524 or AIR1 
Produce Preserver Starter kit:
Order Part #P1UB6S1
Produce Preserver Refill kit:
Order Part #P1KC6R1
Door Handle Medallions:
Order Part #W10762987 (Black)
Order Part #W10762993 (Chrome)
REFRIGERATOR USE
Opening and Closing Doors
There are two refrigerator compartment doors. The doors can be 
opened and closed either separately or together. There is also an 
automatic closing mechanism so the door(s) will not 
unintentionally be left open. If a door is open at a 40° or smaller 
angle, the door will automatically, softly close. 
IMPORTANT: If the doors do not automatically close at a 40° or 
smaller angle, see the “Bottom Door Hinge” section.
There is a vertically-hinged seal on the left refrigerator door.
When the left-side door is opened, the hinged seal 
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically 
forms a seal between the two doors. 
Using the Controls
The controls are located above the external dispenser.
IMPORTANT: The display screen on the dispenser control panel 
will turn off automatically and enter “sleep” mode when the 
control buttons and dispenser paddles have not been used for 
2 minutes or more. Press any control button to reactivate the 
display screen. The home screen will appear as shown. 
Viewing and Adjusting Temperature Set Points
For your convenience, your refrigerator and freezer controls are 
preset at the factory. 
When you first install your refrigerator, make sure that the controls 
are still set to the recommended set points. The factory 
recommended set points are 37°F (3°C) for the refrigerator and 
0°F (-18°C) for the freezer. 
IMPORTANT: 
Wait 24 hours before you put food into the refrigerator. If you 
add food before the refrigerator has cooled completely, your 
food may spoil.
NOTE: Adjusting the set points to a colder than 
recommended setting will not cool the compartments any 
faster.
If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.
The recommended settings should be correct for normal 
household use. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.
NOTE: Areas such as a garage, basement, or porch may have 
higher humidity or extreme temperatures. You may need to 
adjust the temperature away from the recommended settings 
to accommodate for these conditions. 
Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.
A. Hinged seal
A