KitchenAid W10537977A オーナーマニュアル

REFRIGERATOR USE

The controls are located above the external dispenser.

IMPORTANT: The display screen on the dispenser control panel 
will turn off automatically and enter “sleep” mode when the 
control buttons and dispenser paddles have not been used for 
2 minutes or more. Press any control button to reactivate the 
display screen. The home screen will appear as shown. 

For your convenience, your refrigerator and freezer temperature 
controls are set to the recommended set points at the factory. 

When you first install your refrigerator, make sure the temperature 
controls are still set to the recommended set points. The 
recommended set points are 37°F (3°C) for the refrigerator and 
0°F (-18°C) for the freezer. 

■

Wait 24 hours before you put food into the refrigerator. If you 
add food before the refrigerator has cooled completely, your 
food may spoil.

NOTE: Adjusting the set points to a colder than 
recommended setting will not cool the compartments any 
faster.

■

If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.

■

The recommended set points should be correct for normal 
household use. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.

NOTE: Areas such as a garage or porch, may experience 
hotter or colder temperatures and higher humidity than inside 
the home. You may need to adjust the temperature away from 
the recommended set points to accommodate for these 
conditions. 

■

Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.

1. Press and hold TEMPERATURE for 3 seconds to activate 

Temperature mode.

2. When Temperature mode is activated, press TEMPERATURE 

to toggle between the Refrigerator zone and the Freezer 
zone. The display will show the temperature set point of the 
selected compartment, as shown.

NOTE: When Temperature mode is activated, to view 
temperatures in degrees Celsius, press the LIGHT button, 
under Units. To return the display setting to Fahrenheit, press 
the LIGHT button again. 

Recommended Freezer Temperature 

Refrigerator set point range: 33°F to 45°F (0°C to 7°C). 

Freezer set point range: -5°F to 5°F (-21°C to -15°C).

1. Press and hold TEMPERATURE for 3 seconds to activate 

Temperature mode.

2. When Temperature mode is activated, press TEMPERATURE 

to select the Refrigerator zone. The display will show the 
temperature set point of the selected compartment, as 
shown.

3. Press LOCK, under plus, to raise the set point, or press 

OPTIONS, under minus, to lower the set point. 

4. When you have finished adjusting the refrigerator set point, 

press TEMPERATURE to change the display to show the 
freezer set point. When the zone has been changed, 
“FREEZER” appears on the display screen.