KitchenAid W10537977A オーナーマニュアル

REFRIGERATOR USE

5. Press LOCK, under plus, to raise the set point, or press 

OPTIONS, under minus, to lower the set point.

■

When you have finished adjusting both the refrigerator and 
freezer set points, press MEASURED FILL “Confirm” to save 
the settings. 

NOTE: To exit Temperature mode without saving changes, press 
the ICE MODE button under Back at any time, or allow about 
60 seconds of inactivity. The temperature mode will turn off 
automatically and return to the normal screen. 

Your refrigerator and freezer will not cool when cooling is 
turned off.

■

To turn cooling off, press and hold the LOCK and 
MEASURED FILL buttons at the same time for 3 seconds. 
When cooling is off, “Refrigeration Cooling is Off” will appear 
on the display screen as shown.

IMPORTANT: To avoid unintentionally locking the dispenser 
or changing other settings, be sure to press both buttons at 
exactly the same time. 

■

To turn cooling back on, press and hold LOCK and 
MEASURED FILL for 3 seconds again. “Cooling is Off” will 
disappear from the display screen. 

Press the OPTIONS button to open the Options menu and select 
between Max Cool, Max Ice and Water Filter Status.

Press the ICE MODE button at any time to return to the Normal 
screen.

The Max Cool feature assists with periods of high refrigerator 
use, full grocery loads, or temporarily warm room temperatures. 

■

To turn on the Max Cool feature, press the OPTIONS button 
to enter Options mode, then press the LOCK button, under 
Max Cool, to activate the feature. When the feature is on, the 
Max Cool icon will appear on the dispenser display screen. 
The Max Cool feature will remain on for 24 hours unless 
manually turned off. 

■

To manually turn off the Max Cool feature, press the 
OPTIONS button to enter Options mode (unless you are 
already in Options mode), then press LOCK again. When the 
feature has been turned off, the Max Cool icon will disappear 
from the dispenser display.

■

NOTE: Setting the freezer to a colder temperature may make 
some foods, such as ice cream, harder. 

The Max Ice feature assists with temporary periods of heavy ice 
use by increasing ice production. 

■

To turn on the Max Ice feature, press the OPTIONS button to 
enter Options mode, then press the TEMPERATURE button, 
under Max Ice, to activate the feature. When the feature is on, 
the Max Ice icon will appear on the dispenser display screen. 
The Max Ice feature will remain on for 24 hours unless 
manually turned off. 

■

To manually turn off the Max Ice feature, press the OPTIONS 
button to enter Options mode (unless you are already in 
Options mode), then press TEMPERATURE again. When the 
feature has been turned off, the Max Ice icon will disappear 
from the dispenser display.

Press FILTER STATUS to display the percentage of use remaining 
in the water filter (from 100% to 0%

).

The water filter status lights will let you know when to change 
your water filter. 

■

ORDER FILTER (Yellow) - Order a replacement water filter. 

■

REPLACE FILTER (Red) - Replace the water filter. Replacing 
the disposable water filter will automatically reset the water 
filter status tracking feature. See “Water Filtration System.”

REFRIGERATOR too cold

REFRIGERATOR Setting
1° higher 

REFRIGERATOR too warm 

REFRIGERATOR Setting
1° lower

FREEZER too cold

FREEZER Setting
1° higher

FREEZER too warm /
Too little ice

FREEZER Setting
1° lower