KitchenAid KFIS29PBMS ユーザーズマニュアル

REFRIGERATOR FEATURES

The humidity level in the crisper drawers is automatically 
regulated, so there is no humidity control. 

1. Remove the drawer by pulling it open halfway. Then, lift up on 

the drawer to remove it completely. 

NOTE: If you unintentionally pull open the drawer to the 
drawer stop, it will lock in place and you will not be able to lift 
the drawer up and out. 

2. Replace a drawer by placing it on the slide rails and pushing it 

back into position past the drawer stop.

1. Remove crisper(s).

2. Holding the glass insert firmly with one hand, press up in 

center of glass insert until it rises above the plastic frame. 
Gently slide the glass insert forward to remove.

3. Lift the cover frame up and remove it.

1. Fit back of cover frame into supports on side walls of the 

refrigerator and lower the front of the cover frame into place.

2. Slide rear of glass insert into cover frame and lower front into 

place.

The full-width, temperature-controlled drawer can be used to 
store large deli trays, fresh meat, beverages or other items that 
you want to store at a specific temperature.   

NOTE: Do not place leafy vegetables in the temperature-
controlled drawer. Colder temperatures could damage leafy 
produce. 

IMPORTANT: The control is for this drawer only. It will not affect 
the temperature of, or turn off cooling to the refrigerator or freezer 
compartments. 

For your convenience, temperatures have been preset for the 
optimum storage of fresh meat, party trays, deli and wine.

Press PRESET to toggle among the following four temperature 
settings. Each icon will light up, in turn, and the preset 
temperature will display: 

■

Fresh Meat - 32°F (0°C)

■

Party - 36°F (2°C)

■

Deli (default setting) - 39°F (4°C)

■

Wine - 41°F (5°C)

NOTE: If no button is pressed, the control will revert to Deli, the 
default setting as shown.

Allows you to select the optimum temperature, within the 
temperature range of the drawer, for your storage needs.

The temperature range for the drawer is 32°F (0°C) to 41°F (5°C).

■

Press (+) or (-) to increase or decrease the temperature by 
1 degree. 

NOTES: 

■

If you adjust the temperature to a non-preset 
temperature, the word “custom” will light up. If you adjust 
the temperature to a preset temperature, the preset food 
icon will light up.

■

If you try to select a temperature outside the temperature 
range of the drawer, the temperature display will not 
change. 

1. Push the drawer completely closed. 

2. Lift up the front of the drawer and pull it straight out. 

1. Push the metal glide rails to the rear of the refrigerator.

2. Place the drawer onto the glide rails. While tilting the rear of 

the drawer upward, slide the drawer toward the rear of the 
refrigerator.