Mitel 5 ユーザーズマニュアル
Administrator Phone Guide
14
System Date and Time
You can reset the system time or date when necessary; for example, when the system has
returned to its default state or for daylight-savings time. The date and time are shown on all
display phones and on Station Message Detail Recording (SMDR) reports, which record call
activity data.
returned to its default state or for daylight-savings time. The date and time are shown on all
display phones and on Station Message Detail Recording (SMDR) reports, which record call
activity data.
If enabled in DB Programming, the Mitel 5000 CP supports Automatic Daylight Savings Time
(British Summer Time, in Europe). If Network Time Protocol (NTP) is enabled for your system,
the network date and time automatically synchronize daily at 12:30 a.m. with an identified atomic
clock. Contact your system administrator for more information.
(British Summer Time, in Europe). If Network Time Protocol (NTP) is enabled for your system,
the network date and time automatically synchronize daily at 12:30 a.m. with an identified atomic
clock. Contact your system administrator for more information.
Setting the System Date and Time
You can change the date and time for an individual node or for the entire network.
To set the system date and time:
1.
Dial 9800 (single node) or 9810 (multi-node). The programmed date appears.
2.
Use the dial pad buttons to enter the month, day, and year. For example, enter 020311 for
February 3, 2011. The day of the week is automatically calculated and set by the system
when you enter the date. When you have finished,
February 3, 2011. The day of the week is automatically calculated and set by the system
when you enter the date. When you have finished,
the displays shows the current time
. If you
entered the date incorrectly,
INVALID DATE appears
, and you are prompted to enter a new
date.
If you do not need to change the date, press # or the ACCEPT menu button to skip to the
TIME <programmed time>
prompt.
3.
Use the dial pad buttons to enter the time in hours and minutes. For example, enter 0900
for 9:00. If you entered the time incorrectly,
for 9:00. If you entered the time incorrectly,
INVALID TIME appears
and you are prompted
to enter a new time.
If you do not need to change the time, press # or the ACCEPT menu button twice to exit.
SYSTEM DATE AND TIME UPDATED appears
.
4.
If the system is set for 12-hour display format,
SELECT AM OR PM (AM=1 PM=2) appears.
Press 1 (or the AM menu button) for a.m. or press 2 (or the PM menu button) for p.m.
SYSTEM DATE AND TIME UPDATED appears
.
If you press any button other than 1 or 2,
INVALID TIME appears,
and you are prompted to
enter a new time.
Note:
At any time, you can press
*
to return to the previous menu, or press the Speaker button
to exit programming and cancel any unsaved changes.
Note:
For the Japanese language (which is not supported on the 5xxx phones, enter the date as
year, month, day. For example, type 110203 for February 3, 2011. Also, time prompts are reversed,
and you set a.m. or p.m. before setting the hour and minutes.
and you set a.m. or p.m. before setting the hour and minutes.