Motorola CDMA-EVDO REV A ユーザーズマニュアル
2 - 36 MC75 User Guide
Figure 2-22
Imager Aiming Pattern: Bar Code Centered
Figure 2-23
Imager Aiming Pattern: Bar Code Not Centered
Figure 2-24
Pick List Mode with Multiple Bar Codes in Aiming Pattern
4.
Release the scan button.
Digital Camera Scanning
1.
Ensure that a scan-enabled application is loaded on the MC75.
2.
Aim the camera lens on the back of the MC75 at a bar code.
3.
Press and hold the scan button. A preview window appears on the display window with a red aiming reticle in
the center. The Scan/Decode LED lights red to indicate that scanning is in process.
the center. The Scan/Decode LED lights red to indicate that scanning is in process.
Linear bar code
PDF417 symbol
Symbol
View Finder
(Aiming Pattern)
Correct
Correct
Incorrect
NOTE
Imager decoding usually occurs instantaneously. The MC75 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.