Motorola CDMA-EVDO REV A ユーザーズマニュアル
Using the MC75 2 - 37
Figure 2-25
Sample Scan Application with Preview Window
4.
Move the MC75 until the red aiming reticle is on the bar code to scan. The aiming reticle turns green when the
MC75 is able to decode the bar code.
MC75 is able to decode the bar code.
Figure 2-26
Digital Camera Scanning
5.
Release the scan button. The Scan/Decode LED lights green and a beep sounds, by default, to indicate the
bar code was decoded successfully.
bar code was decoded successfully.
Using the RS507 Hands-free Imager
An RS507 Hands-free Imager can be used with the MC75 to capture bar code data.
To set up the RS507:
1.
Tap Start > Programs > BTScannerCtlPanel icon.
2.
If required, select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.
3.
Tap Save and Exit.
4.
Tap Start > Programs > BD Address icon. A bar code displays.
5.
Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the MC75.
NOTE
OEM version 02.35.000 or higher is required.