Emerson Process Management CFA-3000 ユーザーズマニュアル
13
CFA3000 ISE Analyzer
Instruction Manual
Instruction Manual
2.8 Prepare Reagent Containers
Prepare reagent containers as follows:
1. Remove screw caps from reagent bottles.
2. Using an awl, make one hole in foil for the reagent straw. Do not allow awl to touch reagent or standards.
3. Place Standard and Reagent bottles into reagent cabinet, as shown in Figure 28.
4. Insert colorcoded reagent straws and labeled Standard straw leading from valve pump assembly into holes
1. Remove screw caps from reagent bottles.
2. Using an awl, make one hole in foil for the reagent straw. Do not allow awl to touch reagent or standards.
3. Place Standard and Reagent bottles into reagent cabinet, as shown in Figure 28.
4. Insert colorcoded reagent straws and labeled Standard straw leading from valve pump assembly into holes
punched in corresponding bottles.
Figure 28. Sample Bottle Placement in Cabinet (for all methods; colors refer to reagent straw colors)