Hitachi hdc-401ex 사용자 설명서

The computer must satisfy the following conditions before you can connect your
HDC-401EX to the computer using the USB cable (for the loading of captured
images, etc.). Check to see if the computer meets these requirements before
connecting the camera. 

■ OS: Microsoft Windows 98/98SE/Me/2000/XP

■ Preinstalled with a USB interface (Ver. 1.1) 

■ Preconfigured with a CD-ROM drive

●

The OS must be preinstalled. Proper operation cannot be guaranteed on a
custom computer or in an upgraded OS, even if it is one of the systems
specified above.

●

The correct operation cannot be guaranteed if the HDC-401EX is connected 

via a USB hub or extended USB board.

●

You may not be able to operate the HDC-401EX correctly on the computer, 
depending on the peripheral configuration.

→Proceed to     , Installing the HDC-401EX Driver in the Computer

→Proceed to     , Connecting the HDC-401EX to the Computer Using

the USB Cable

78

77

Open My Computer and click the removable disk (= camera).
Copy the desired image files to the computer         .

※When your HDC-401EX is connected to the computer for the first time,

the New Software wizard is displayed. It will quickly navigate you through
the necessary steps so that the computer can automatically recognize
the HDC-401EX.

Check

the

operating

environment

of
the

computer

Operations

While

Connected

to
a

C

omputer