Denon AVR-1611 사용자 설명서

49

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select 

MultEQ, Dynamic EQ and Dynamic Volume (vpage 46, 47).

• Manual Setup can be used without changing the settings. Please set if necessary.

Amp Assign
Set the speakers connected 
to this unit. 

Normal  :  Set  when  using  7.1-channel  (Front/Center/Surround/Surround 
Back/Subwoofer) speakers.
ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/
AMP ASSIGN terminals.
Front Height : Set for connecting the front height speakers to the SURR. 
BACK/AMP ASSIGN terminals.
Front  Bi-Amp  :  Set  for  connecting  a  tweeter  of  a  front  speaker  to  the 
SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to 
the FRONT terminals. 
Front  B  :  Set  for  connecting  the  second  front  speakers  to  the  SURR. 
BACK/AMP  ASSIGN  terminals.  In  this  case,  make  settings  for  “Front 
Speaker Setup” (vpage 51).

 Since “Amp Assign” of this unit is set to “ZONE2” by default, audio is 

not output from the surround back speakers. When using the surround 
back speakers with MAIN ZONE, change the “Amp Assign” setting to 
“Normal”.

Speaker Config.
Select speaker configuration 
and size (bass reproduction 
capability).

Do not use the outward 
shape of the speaker to 
determine selection of a 
“Large” or “Small” speaker. 
Instead, use the frequencies 
set in “Crossover 
Frequency” (vpage 50) as 
the standard for determining 
bass reproduction capability.

Front : Set the front speaker size.
• Large  :  Use  a  large  speaker  that  can  adequately  play  back  low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• When  “Subwoofer”  is  set  to  “No”,  “Front”  is  automatically  set  to 

“Large”.

• When  “Front”  is  set  to  “Small”,  “Center”,  “Surround“,  “Surround 

Back” and “Front Height” can not be set to “Large”.

Center : Set the presence and size of the center speaker.
• Large  :  Use  a  large  speaker  that  can  adequately  play  back  low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when a center speaker is not connected.

 “Large” is not displayed when “Front” is set to “Small”. 

Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.

 When “Front” is set to “Small”, “Subwoofer” is automatically set to 

“Yes”.

Move the cursor 
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu

Speaker Config.
(Continued)

Surround : Set the presence and size of the surround speakers.
• Large  :  Use  a  large  speaker  that  can  adequately  play  back  low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when the surround speakers are not connected.

• When  “Surround”  is  set  to  “Large”,  “Surround  Back”  and  “Front 

Height” can be set to “Large”.

• When  “Surround”  is  set  to  “None”,  “Surround  Back”  and  “Front 

Height” can automatically set to “None”.

S.Back : Set the presence, size and number of surround back speakers.
• Large  :  Use  a  large  speaker  that  can  adequately  play  back  low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when the surround back speakers are not connected.

• 2sp : Use two surround back speakers.
• 1sp : Use only one surround back speaker. When you select this setting, 

connect the surround back speaker to the left (L) channel.

 Even  when  the  “S.Back“  setting  is  other  than  “None”,  sound  may 

not  be  emitted  from  the  surround  back  speaker,  depending  on  the 
playback source. In this case, make “Surround Parameter” – “S.Back” 
setting other than “OFF” (vpage 45).

When the “Amp Assign” setting (vpage 49) is other than “Normal”, you 
cannot make the “S.Back” setting. 
Front Height : Set the presence and size of the front height speakers.
• Large  :  Use  a  large  speaker  that  can  adequately  play  back  low 

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for 

low frequencies.

• None : Select when the front height speakers are not connected.

When the “Amp Assign” setting (vpage 49) is other than “Front Height”, 
you cannot make the “Front Height” setting.