Denon AVR-1611 사용자 설명서

51

Front Speaker Setup
Set the front speakers to 
use for every surround 
mode.

This can be set when “Amp 
Assign” is set to “Front B” 
(vpage 49).

DIRECT/STEREO : The front speakers used in the direct, stereo and pure 
direct play modes (2 channel) are set in advance.
• A

：Front speaker A is used.

• B

：Front speaker B is used.

• A+B

：Both front speakers A and B are used.

MULTI  CH  :  The  front  speakers  used  in  modes  other  than  the  direct, 
stereo and pure direct play modes (2 channel) are set in advance.
• A

：Front speaker A is used.

• B

：Front speaker B is used.

• A+B

：Both front speakers A and B are used.

Move the cursor 
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu

Make settings for HDMI video/audio output.

Auto Lip Sync
Make automatic 
compensation for timing 
shift in audio and video 
output.

ON : Compensated.
OFF : Not compensated.

HDMI Audio Out
Select HDMI audio output 
device.

Amp : Play back through speakers connected to the receiver.
TV : Play back through TV connected to the receiver.

 When the HDMI control function is activated, priority is given to the TV 

audio setting (vpage 32 “HDMI control function”).

HDMI Control
You can link operations with 
devices connected to HDMI 
and compatible with HDMI 
Control.

ON : Use HDMI control function.
OFF : Do not use HDMI control function.

• When a device that is not compatible with the HDMI control function is 

connected, set “HDMI Control” to “OFF”. 

• Please consult the operating instructions for each connected component 

to check the settings.

• Refer to “HDMI control function” (vpage 32) for more information about 

the HDMI control function.

• When “HDMI Control” is set to “ON”, it consumes more standby 

power.  If  you  are  not  using  this  unit  for  an  extended  period,  it  is 
recommended that you unplug the power cord from the power outlet.

• “HDMI Control” does not work when the power to the equipment is off. 

Either turn power on or set to standby.

• The HDMI control function controls operations of a TV that is compatible 

with the HDMI control function. Make sure that the TV and HDMI are 
connected when you perform HDMI control.

• If  the  “HDMI  Control”  settings  have  been  changed,  always  reset  the 

power to connected devices after the change.

Standby Source
Sets the HDMI input source 
to put into standby when 
the power is on.

Last : This item is set at the last-used input source.
HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into 
standby.

 “Standby Source” can be set when “HDMI Control” is set to “ON”.

Power Off Control
Links the power standby 
of this unit to external 
equipment.

All : If power to a connected TV is turned off independently of the input 
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source 
is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is 
automatically set to standby.
OFF : This unit does not link with power to a TV.

 “Power Off Control” can be set when “HDMI Control” is set to “ON”.