Roland VS-700 사용자 설명서
85
O
v
er
vie
w
vie
w
C
onnec
tions
V
S-700C C
onsole
V
S-700R I/O
F
a
n
tom V
S
A
p
pendix
Compressor Parameters
Digital compressors are built into the eight audio inputs (INPUT 1–8).
If you’re using SONAR, you can edit the compressor parameters as described below.
If you’re using software other than SONAR, use “VS-700R I/O Editor” which is included on the “SONAR V-
STUDIO 700 CD-ROM.”
1.
From SONAR’s “Tools” menu, open “VS-700.”
2.
Select the “MIC PRE” tab.
3.
Apply the desired compressor settings.
These settings are not stored in the VS-700.
You can use the channel strip rotary encoders to control the Mic Pre Gain, Threshold ,Attack and Release
parameters on the VS-700R I/O. For details, refer to
Setting
Screen label
Range
Default
Explanation
Comp switch
COMP
OFF, ON
OFF
Enables the compressor.
Threshold
THRES
-60–0 dB
-20 dB
Specifies the signal level at which the compressor
will be applied.
will be applied.
Ratio
RATIO
1:1.0,
1:1.1,
1:1.2,
1:1.4,
1:1.6,
1:1.8,
1:2.0,
1:2.5,
1:3.2,
1:4.0,
1:5.6,
1:8.0,
1:16,
1:INF
1:1.1,
1:1.2,
1:1.4,
1:1.6,
1:1.8,
1:2.0,
1:2.5,
1:3.2,
1:4.0,
1:5.6,
1:8.0,
1:16,
1:INF
1:4.0
Specifies the compression ratio by which the
audio signal will be compressed.
audio signal will be compressed.
Attack time
ATK
0–100
Actual value (0.2–100 ms)
Release time
REL
0–100
Actual value (10–500 ms)
Gain
GAIN
-30–30 dB
0 dB
Adjusts the output level of the compressor.
VS-700_r_e.book 85 ページ ２００８年１１月２０日 木曜日 午後２時２８分