Roland VS-700 사용자 설명서

 

Direct Monitor Mixer

 

By using the Direct Monitor Mixer, input signals and signals from the internal sound generator can be output directly 

to the monitor without being routed through the computer. The Direct Monitor Mixer is a stereo mixer that lets you 

adjust parameters such as volume and pan for each input and audio source. As the output destination of the mixer, 

you can select Main, Sub, or Digital 1 Out as desired. (You can also select more than one of these simultaneously.)

If you’re using SONAR, you can edit the Direct Monitor Mixer parameters as described below.

 

If you’re using software other than SONAR, use “VS-700R I/O Editor” which is included on the “SONAR V-

STUDIO 700 CD-ROM.”

 

These settings are not stored in the VS-700.

 

The output of the monitor mixer can be mixed to the following three audio outputs.

You can select multiple output destinations simultaneously, but the same signal will be output. If you’re monitoring 

through headphones, select Main or Sub.

 

Mono

MONO

Stereo, Mono

The adjacent stereo pair will be mixed to a 
monaural signal. If the input signal is a single 
channel (monaural), use the MONO setting.

Solo

SOLO

OFF, ON

Solo within the monitor mix.

Mute

MUTE

OFF, ON

Mute within the monitor mix.

Pan

PAN

L (100%)–R (100%)

Adjust the pan within the monitor mix.

Volume

VOLUME

-

 

∞

 

–+6 dB

Monitor volume.

 

Main output

MAIN

OFF, ON

Main output

Sub output

SUB

OFF, ON

Sub output

Digital output 1

DIGITAL 1

OFF, ON

Digital output 1

VS-700_r_e.book 86 ページ ２００８年１１月２０日　木曜日　午後２時２８分