Datalogic Scanning PD7100 사용자 설명서

Setting Up the Reader

Other connection types are described below and illustrated in 

Figure 2

.

Connect the reader to a USB port on the terminal/PC using the correct 

USB cable for the interface type you ordered. Reference 

Figure 2

.

Connect the reader to the IBM port on the terminal/PC using the cor-

rect IBM cable. Reference 

Figure 2

.

The Keyboard Wedge cable has a ‘Y’ connection from 

the reader. Connect the female to the male end from the keyboard and the remaining end at the 
keyboard port at the terminal/PC. Reference 

Figure 2

.

The reader is factory-configured with a set of default features standard. After scanning the inter-
face barcode from the 

Interfaces

 section, you can select other options and customize your 

reader through use of the instructions and programming barcodes available in the corresponding 
features section for your interface and also the Data Editing and Symbologies chapters of this 
manual.