Kodak ESP 3260 사용자 설명서

 35

Some problems can be resolved quickly by power cycling the printer: Turn off your 
printer. Wait five seconds. Turn on the printer. 

Use the following information to help troubleshoot problems with your printer.

For more troubleshooting information, go to:

•

 to use our Step-by-Step Solutions and Repair tool for 

help with problems such as paper jams and image quality.

•

 for FAQs and links to other support for 

your printer.

•

 to download the latest software and 

firmware files.

•

 for the recommended system requirements.

Printer does not power on

• Make sure you are using the power cord that came with your printer. 

• Make sure the power cord is connected to the AC adapter and is plugged 

into an outlet or power strip.

• If the USB 2.0 cable was disconnected from the printer, then reconnected, or 

if power to the printer was interrupted, restart the computer.

Printer not detected

• Make sure your printer is plugged in and turned on.

• Make  sure: 

–

you have a USB 2.0 cable.

–

that the USB cable is connected to both your printer and your computer.

Printhead carriage jam

• Open the printer access door and clear any obstructions.

• Check that the printhead and ink cartridges are installed correctly.

(The printhead and ink cartridges are installed correctly when you hear 
them click into place.)

Image quality problems

• For best results, use KODAK Paper or a paper with the COLORLOK 

Technology logo on the package.

• Make sure the paper is loaded correctly. See 

5. For more help, go to 

, select 

All-in-one printer, 

then 

Print Quality (missing colors, blank prints, etc).

Ink cartridge problems

• Check that KODAK Ink Cartridge(s) are installed. Do not use non-Kodak 

brand or refilled ink cartridges. 

• Remove, then install the cartridges again. Make sure the cartridges click into 

place.