Kodak ESP 3260 사용자 설명서

36

For more troubleshooting information, go to 

The status light indicates the condition of the printer. 

Paper jam

• Check for paper in the rear-access cleanout area.

• Open the printer access door and gently remove any paper from inside the 

printer. 

• Make sure the paper in the tray is free of tears or creases.

• Make sure you do not overload the paper tray.

For more information, see 

. Select All-in-one printer, 

then Paper jam.

Error messages or other 
problems you cannot 
resolve

If you need to contact Kodak (see 

), have the 

following information available:

• Kodak Service Number (located inside or on the outside of the printer)

• Printer mode number (located on the back of the printer)

• Computer model, operating system, and version of Home Center Software

• Exact wording of any error message(s)

Off

• The printer is turned off.

– Press the on/off button to turn on power.

• The printer does not have power.

– Make sure that the power cord is plugged into the back of the printer and 

into an electrical outlet, and that the electrical outlet has power.

Blinking

• The  printer  is  busy.

– Wait for the printer to finish the task.

On

• The  printer  is  ready