Nortel Networks 311 사용자 설명서
78
Acceptance tests
Procedure 9
Testing a trunk card using a maintenance telephone
Step
Action
1
Access the system from a maintenance telephone.
See "Communicating with the Meridian 1" in the Software
Input/Output Reference — Administration (NN43001-611) for details
on accessing the system from a maintenance telephone.
Input/Output Reference — Administration (NN43001-611) for details
on accessing the system from a maintenance telephone.
2
Test the trunk unit:
LD 36
TRK l s c u
loop, shelf, card, and unit numbers
3
If the maintenance telephone is hooked up to a monitor and the
system response is other than OK, see Software Input/Output
Reference — Administration (NN43001-611) to analyze the
messages.
system response is other than OK, see Software Input/Output
Reference — Administration (NN43001-611) to analyze the
messages.
—End—
Procedure 10
Testing a trunk card using a system terminal
Step
Action
1
Log into the system:
LOGI
(password)
2
Enter:
LD 36
3
To test a trunk from a remote test center, seize a central office (CO)
monitor trunk:
monitor trunk:
CALL
or
CALL l s c u
Seize the automatic number identification (ANI) trunk:
TRK l s c
u
loop, shelf, card, and unit numbers
When you see the
DN?
prompt, enter the directory number (DN) you
want the system to dial.
If the system response is other than OK, see the Software
Input/Output Reference — Administration (NN43001-611) to analyze
the messages.
Input/Output Reference — Administration (NN43001-611) to analyze
the messages.
4
End the session in LD 36:
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.