Nortel Networks 311 사용자 설명서
82
Option settings
Circuit card grid
Some circuit cards contain option switches or jumpers, or both, that define
specific functions. A switch or jumper can be identified by an alphanumeric
coordinate (such as D29) that indicates a location on the card, or by a switch
number (such as SW2) printed on the circuit board (see
specific functions. A switch or jumper can be identified by an alphanumeric
coordinate (such as D29) that indicates a location on the card, or by a switch
number (such as SW2) printed on the circuit board (see
). Positions on a switch (for example, positions 1, 2, 3,
and 4 on SW2) are labeled on the switch block.
On a circuit card:
•
ON may be indicated by the word "on," the word "up," the word "closed,"
the number "1," an arrow pointing up, or a solid dot (•).
the number "1," an arrow pointing up, or a solid dot (•).
•
OFF may be indicated by the word "down," the word "open," the number
"0," or an arrow pointing down.
"0," or an arrow pointing down.
Throughout this document, if neither ON nor OFF is given (there is a blank
space) for a position on a switch, that position may be set to either ON or
OFF because it has no function for the option described.
space) for a position on a switch, that position may be set to either ON or
OFF because it has no function for the option described.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.