Siemens se5880 사용자 설명서

Dynamic Host Configuration Protocol (DHCP) provides a dynamic, “upon request,” IP address to computers 
and other networked devices. The router can act as a DHCP server for devices on your local network. 

The router provides the flexibility to use different ranges of IP addresses to be assigned by the DHCP server 
housed in the router. DHCP configuration is done from the DHCP Configuration page.

To configure DHCP:

1. Optionally select DHCP server enabled on the LAN. If selected, the DHCP server dynamically assigns IP 

addresses to all LAN-side devices.

2. Select one of the following to configure the Domain Name Service:

Obtain DNS information automatically:
The DNS server address will be learned when DHCP client requests are placed over the WAN link.

Configure DNS manually:
Define DNS server address manually from information you get from your service provider. If you select 
this option, provide the following information.
– Domain Name

The router’s DNS domain name as assigned by your service provider. 

IP address where DNS requests will be sent. 

Optional. IP address where DNS requests will be sent if the primary DNS server is unavailable.

IP address of the Windows Internet Naming Service where WINS requests will be sent. This maps 
NetBIOS names to IP addresses similar to DNS. 

Optional. IP address where WINS requests will be sent if the primary WINS server is unavailable. 

3. Click Next. This displays the 

 page.