Enterasys Networks 1G58x-09 사용자 설명서
IP Configuration Command Set
Reviewing and Saving the Routing Configuration
12-9
Syntax Description
None.
Command Type
Router command.
Command Mode
Interface configuration: Matrix>Router(config-if(Vlan <vlan_id>))#
Command Defaults
None.
Example
The following example shows how to enable VLAN 1 for IP routing:
12.2.2 Reviewing and Saving the Routing Configuration
Purpose
To review and save the current routing configuration, and to disable IP routing.
Commands
The commands needed to review and save the routing configuration are listed below and described
in the associated section as shown:
in the associated section as shown:
•
show running-config (
•
write (
)
•
no ip routing (
)
NOTE: The shutdown form of this command disables an interface for IP routing.
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#no shutdown