TP-LINK TL-SG3210 사용자 설명서

 

12

 

VLAN 
Configuration 
Mode  

Use the vlan  vlan-list 
command to enter this 
mode from Global 
Configuration mode. 

vlan)# 

Use the end command or press Ctrl+Z 
to return to Privileged EXEC mode. 
Enter the exit  or the  # command to 
return to Global configuration mode. 

1.  The user is automatically in User EXEC Mode after the connection between the PC and 

the switch is established by a console port or by a telnet connection. 

2.  Each command mode has its own set of specific commands. To configure some 

commands, you should access the corresponding command mode firstly. 



 

Global Configuration Mode: In this mode, global commands are provided, such as 

the Spanning Tree, Schedule Mode and so on. 



 

Interface Configuration Mode: In this mode, users can configure one or several 

ports, different ports corresponds to different commands 

a).  Interface gigabitEthernet: Configure parameters for an Ethernet port, such as 

Duplex-mode, flow control status. 

b).  Interface range gigabitEthernet: The commands contained are the same as that 

of the Interface Ethernet. Configure parameters for several Ethernet ports. 

c).  Interface link-aggregation: Configure parameters for a link-aggregation, such as 

broadcast storm. 

d).  Interface range link-aggregation: Configure parameters for multi-trunks. 

e).  Interface vlan: Configure parameters for the vlan-port. 



 

Vlan Configuration Mode: In this mode, users can create a VLAN and add a 

specified port to the VLAN.   

3.  Some commands are global, that means they can be performed in all modes: 



 

show: Displays all information of switch, for example: statistic information, port 

information, VLAN information.   



 

history: Displays the commands history

.

 

This switch’s security is divided into two levels: User level and Admin level. 

User level only allows users to do some simple operations in User EXEC Mode; Admin level 

allows you to monitor, configure and manage the switch in Privileged EXEC Mode, Global 

Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode.