TP-LINK TL-SG3210 사용자 설명서

 

79

 

The logging file flash command is used to configure the level and the status of 

the log file input. To restore to the default configuration, please use no logging 

file flash command. The log file indicates the flash sector for saving system log. 

The information in the log file will not be lost after the switch is restarted and can 

be got by the 

 command. 

logging file flash level 

level —— Severity level of the log information output to each channel.

There 

are 8 severity levels marked with values 0-7. The smaller value has the higher 

priority. Only the log with the same or smaller severity level value will be output. 

By default, it is 4 indicating that the log information marked with 0~4 will be 

saved in the log buffer. 

Global Configuration Mode 

Enable the log file function and set the severity as 7: 

TL-SG3424(config)# logging file flash 7 

The clear logging command is used to clear the information in the log buffer 

and log file.   

clear logging [ buffer | flash ] 

buffer | flash —The output channels: buffer and flash. Clear the information of 

the two channels, by default.