TP-LINK TL-SG3210 사용자 설명서

 

80

 

Global Configuration Mode 

Clear the information in the log file: 

TL-SG3424(config)# clear logging buffer 

The logging host index command is used to configure the Log Host. To clear 

the configuration of the specified Log Host, please use no logging host index 

command. Log Host is to receive the system log from other devices. You can 

remotely monitor the settings and operation status of other devices through the 

log host. 

logging host index idx host-ip level 

no logging host index idx 

idx —— The index of the log host. The switch supports 4 log hosts at most. 

host-ip —— The IP for the log host. 

level —— The severity level of the log information sent to each log host. There 

are 8 severity levels marked with values 0-7. The smaller value has the higher 

priority. Only the log with the same or smaller severity level value will be sent to 

the corresponding log host. By default, it is 6 indicating that the log information 

marked with 0~6 will be sent to the log host. 

Global Configuration Mode 

Set the IP address as 192.168.0.148, the level 5: 

TL-SG3424(config)# logging host index 2 192.168.0.148 5